Name: Omron Inverter 3G3RX2-A4037,V/f, Sensorless Vector, Close Loop Vector Suppliers, Distributor - Discount Price - LANEN
Brand: Lanen
SKU: 231596608

Specification

Built-in Communications	Modbus built-In
Control Type	V/f, Sensorless Vector, Close Loop Vector
Flow-chart logic programming	Yes
Mounting	Vertical Mount
Power Phase	3-phase
Speed range	0.01 - 400 Hz
Starting torque	2
Supply Voltage	480 VAC
Power Phase	3-phase
Constant Torque-Horsepower	5 HP
Constant Torque-Current	9.0 A

Note: Select options by the maximum applicable motor capacity of heavy and light load rating.

dimension

3G3RX2 Dimensions 2

software

3G3RX2-A2[][][][][]				A2004	A2007	A2015	A2022	A2037
Applicable motor (4-pole) capacity (kW)			VLD	0.75	1.5	2.2	3.7	5.5
			LD	0.75	1.5	2.2	3.7	5.5
			ND	0.4	0.75	1.5	2.2	3.7
Output	Rated output current (A)		VLD	4.4	8.0	10.4	15.6	22.8
			LD	3.7	6.3	9.4	12.0	19.6
			ND	3.2	5.0	8.0	11.0	17.5
	Overload current rating		VLD	110% 60 sec / 120% 3 sec
			LD	120% 60 sec / 150% 3 sec
			ND	150% 60 sec / 200% 3 sec
	Rated output voltage			3-phase (3-wire) 200 to 240 V (depending on receiving voltage)
	Rated capacity (kVA)	200 V	VLD	1.5	2.8	3.6	5.4	7.9
			LD	1.3	2.2	3.3	4.2	6.8
			ND	1.1	1.7	2.8	3.8	6.1
		240 V	VLD	1.8	3.3	4.3	6.5	9.5
			LD	1.5	2.6	3.9	5.0	8.1
			ND	1.3	2.1	3.3	4.6	7.3

Braking	Regenerative braking	Equipped with BRD circuit (with a discharging resistor separately installed)
Braking	Minimum resistance that can be connected (Ω)	16	10	10	7.5	7.5
Dimension	Height (mm)	260	260	260	390	390
	Width (mm)	210	210	210	245	245
	Depth (mm)	170	170	170	190	190
Protective construction		IP20 *5 / UL open type
Approximate mass (kg)		6	6	6	10	10

3G3RX2-A2[][][][][]		A2220	A2300	A2370	A2450	A2550
Applicable motor (4-pole) capacity (kW)	VLD	30	37	45	55	75
	LD	30	37	45	55	75
	ND	22	30	37	45	55

Note: For details, refer to the CX-One Catalog (Cat. No. R134), visit your local OMRON website.

Automation Software Sysmac Studio

built-in EMC filter

The RX2 Series with the same mounting dimension as the previous model will fit in the existing control panel or mounting location. In addition, the same setting software CX-Drive can be used for the RX2 Series. Parameter settings and programs used for the previous model can be easily converted and transferred to the RX2 Series.
Note: The depth of some models may vary.

3G3RX2 Features 2

Built-in EMC Filter

• Inverter: Select the model of your inverter. The table below assumes that your inverter is used in the heavy load mode and
connected to a single motor with the same capacity. Make sure that the approximate braking torque in the table
shows the assumed value per a motor with the same capacity at ND mode. When using this inverter at LD or VLD
mode, you need to calculate the torque value by dividing VLD by ND.

• Operating conditions: Show the torque during deceleration and the deceleration time (in % ED) calculated as a percentage
of the cycle time for 1 cycle of operation including the stop time.
• Braking unit/Breaking resistor: Show the required the model and number of units.
• Connection form: Show the configuration of the regenerative braking unit(s) and braking resistor(s) illustrated in the
connection form table below.
• Restrictions: Show the maximum deceleration time allowable for the combination shown here and the minimum resistance
that can be connected to the inverter's built-in regenerative braking circuit or external regenerative braking unit(s).

Name	Specifications	Model
PG Option Unit	For Position or Frequency Control	3G3AX-RX2-PG01
Digital Operator Connecting Cable	RJ45 connector, EIA568-compliant cable (UTP category 5), Cable Length 1 m	3G3AX-OPCN1
Digital Operator Connecting Cable	RJ45 connector, EIA568-compliant cable (UTP category 5), Cable Length 3 m	3G3AX-OPCN3