Specification

Built-in Communications	Modbus built-In
Control Type	V/f, Sensorless Vector, Close Loop Vector
Flow-chart logic programming	Yes
Mounting	Vertical Mount
Power Phase	3-phase
Speed range	0.01 - 400 Hz
Starting torque	2
Supply Voltage	480 VAC
Power Phase	3-phase
Constant Torque-Horsepower	60 HP
Constant Torque-Current	91 A

Note: Select options by the maximum applicable motor capacity of heavy and light load rating.

related options

The RX2 Series features Safe Torque Off (STO) as standard to meet your machine safety needs.

･STO according to IEC 61800-5-2:2016
･PLe and CAT 4 according to EN ISO 13849-1:2015
･SIL3 according to IEC 61508:2010 and EN/IEC 62061:2012

3G3RX2 Features 9

software

Input terminal function		11 terminals (input of pulse string is available on terminal A and B)
Input terminal function		FW (Normal rotation)/RV (Reverse rotation), CF1-4 (Multistage speed 1-4), SF1-7 (Multistage speed bit 1-7), ADD (Addition of frequency), SCHG (Switching of frequency command), STA (3-wire start)/STP (3-wire stop)/F_R (3-wire normal/ reverse), AHD (Retention of analog command), FUP (Increase of speed via remote operation/FDN (Deceleration via remote operation), UDC (Deletion of data via remote operation), F-OP (Forced command switching), SET (Second control), RS (Reset), JG (Jogging), DB (External current braking), 2CH (2-stage acceleration/deceleration), FRS (Free-run stop), EXT (External abnormality), USP (Prevention of restart after restoration of power), CS (Commercial switching), SFT (Soft-lock), BOK (Brake check), OLR (Overload restriction switching), KHC (Clearance of integrated input power), OKHC (Clearance of integrated output power), PID (PID1 disabled), PIDC (PID1 integration reset), PID2 (PID2 disabled), PIDC2 (PID2 integration reset), SVC1-4 (PID1 multistage target values 1-4), PRO (PID gain switching), PIO (PID output switching), SLEP (SLEEP condition satisfied)/WAKE (WAKE condition satisfied), TL (Torque restriction enabled), TRQ1, 2 (Switching of torque limit 1, 2), PPI (Switching of P/PI control), CAS (Switching of control gain), FOC (Preparatory excitation), ATR (Torque control enabled), TBS (Torque bias enabled), LAC (Cancellation of acceleration/ deceleration), Mi1-11 (General-purpose input 1-11), PCC (Clearance of pulse counter), ECOM (Start of EzCOM), PRG (Program run), HLD (Acceleration/ deceleration stop), REN (Operation permission signal), PLA (Pulse string input A), and PLB (Pulse string input B)

Note: For details, refer to the CX-One Catalog (Cat. No. R134), visit your local OMRON website.

Automation Software Sysmac Studio

Payment & dilivery

● Trade Terms: EXW Guangzhou, China

Mitsubishi RJ71DN91 Network Module DeviceNet Communication Module R Series

● Payment Methods:

√ Accepted Payment Currency: USD, CNY