E2A-S08KN04-M5-B2 Sensor: Inductive; OUT: PNP / NC; 0÷4mm; 12÷24VDC; M8; IP67; 200mA
Part number:E2A-S08KN04-M5-B2
Sensor: inductive; OUT: PNP / NC; 0÷4mm; 12÷24VDC; M8; IP67; 200mA
Contact us: inquiry@lanenelectric.com
Product Introduction
Product Specifications |
|
Manufacturer |
OMRON | |
|
Type of sensor |
inductive | |
|
Output configuration |
PNP / NC | |
|
Range |
0...4mm | |
|
Switch housing |
M8 | |
|
Connection |
connector M8 | |
|
IP rating |
IP67 | |
|
Max. operating current |
0.2A | |
|
Operating temperature |
-40...70°C | |
|
Kind of forehead |
non-embedded | |
|
Body material |
stainless steel |

Ordering Information continued (Shaded models are normally stocked.) E2A-M12KS04-WP-B2 2M E2A-M12KS04-WP-C2 2M E2A-M12LS04-WP-B2 2M E2A-M12LS04-WP-C2 2M E2A-M12KS04-M1-B2 E2A-M12KS04-M1-C2 E2A-M12LS04-M1-B2 E2A-M12LS04-M1-C2 E2A-M12KN08-WP-B2 2M E2A-M12KN08-WP-C2 2M E2A-M12LN08-WP-B2 2M E2A-M12LN08-WP-C2 2M E2A-M12KN08-M1-B2 E2A-M12KN08-M1-C2 E2A-M12LN08-M1-B2 E2A-M12LN08-M1-C2 E2A-M18KS08-WP-B2 2M E2A-M18KS08-WP-C2 2M E2A-M18LS08-WP-B2 2M E2A-M18LS08-WP-C2 2M E2A-M18KS08-M1-B2 E2A-M18KS08-M1-C2 E2A-M18LS08-M1-B2 E2A-M18LS08-M1-C2 E2A-M18KN16-WP-B2 2M E2A-M18KN16-WP-C2 2M E2A-M18LN16-WP-B2 2M E2A-M18LN16-WP-C2 2M E2A-M18KN16-M1-B2 E2A-M18KN16-M1-C2 E2A-M18LN16-M1-B2 E2A-M18LN16-M1-C2 E2A-M30KS15-WP-B2 2M E2A-M30KS15-WP-C2 2M E2A-M30LS15-WP-B2 2M E2A-M30LS15-WP-C2 2M E2A-M30KS15-M1-B2 E2A-M30KS15-M1-C2 E2A-M30LS15-M1-B2 E2A-M30LS15-M1-C2 E2A-M30KN20-WP-B2 2M E2A-M30KN20-WP-C2 2M E2A-M30LN30-WP-B2 2M E2A-M30LN30-WP-C2 2M E2A-M30KN20-M1-B2 E2A-M30KN20-M1-C2 E2A-M30LN30-M1-B2 E2A-M30LN30-M1-C2 E2A-M12KS04-WP-B1 2M E2A-M12KS04-WP-C1 2M E2A-M12LS04-WP-B1 2M E2A-M12LS04-WP-C1 2M E2A-M12KS04-M1-B1 E2A-M12KS04-M1-C1 E2A-M12LS04-M1-B1 E2A-M12LS04-M1-C1 E2A-M12KN08-WP-B1 2M E2A-M12KN08-WP-C1 2M E2A-M12LN08-WP-B1 2M E2A-M12LN08-WP-C1 2M E2A-M12KN08-M1-B1 E2A-M12KN08-M1-C1 E2A-M12LN08-M1-B1 E2A-M12LN08-M1-C1 E2A-M18KS08-WP-B1 2M E2A-M18KS08-WP-C1 2M E2A-M18LS08-WP-B1 2M E2A-M18LS08-WP-C1 2M E2A-M18KS08-M1-B1 E2A-M18KS08-M1-C1 E2A-M18LS08-M1-B1 E2A-M18LS08-M1-C1 E2A-M18KN16-WP-B1 2M E2A-M18KN16-WP-C1 2M E2A-M18LN16-WP-B1 2M E2A-M18LN16-WP-C1 2M E2A-M18KN16-M1-B1 E2A-M18KN16-M1-C1 E2A-M18LN16-M1-B1 E2A-M18LN16-M1-C1 E2A-M30KS15-WP-B1 2M E2A-M30KS15-WP-C1 2M E2A-M30LS15-WP-B1 2M E2A-M30LS15-WP-C1 2M
Safety Precautions Power Supply Do not impose an excessive voltage on the E2A, otherwise it may be damaged. Do not impose AC current (100 to 240 VAC) on any DC model, otherwise it may be damaged. Load Short-circuit Do not short-circuit the load, or the E2A may be damaged. The E2A's short-circuit protection function will be valid if the polarity of the supply voltage imposed is correct and within the rated voltage range. Wiring Be sure to wire the E2A and load correctly, otherwise it may be damaged. Connection with No Load Be sure to insert loads when wiring. Make sure to connect a proper load to the E2A in operation, otherwise it may damage internal elements. Do not expose the product to flammable or explosive gases. Do not disassemble, repair, or modify the product. Correct Use Designing Power Reset Time The Proximity Sensor is ready to operate within 100 ms after power is supplied. If power supplies are connected to the Proximity Sensor and load respectively, be sure to supply power to the Proximity Sensor before supplying power to the load. Effects of Surrounding Metal When mounting the E2A within a metal panel, ensure that the clearances given in the following table are maintained. (Unit: mm) Note 1. In the case of using the supplied nuts. If true flash mounting is necessary, apply a free zone of 1.5 mm. 2. In the case of using the supplied nuts. If true flush mounting is necessary, apply a free zone of 4 mm. Power OFF The Proximity Sensor may output a pulse signal when it is turned OFF. Therefore, it is recommended that the load be turned OFF before turning OFF the Proximity Sensor.
|
Product Solutions |




Model Number Legend Example: E2A-M12LS04-M1-B1 Standard, M12, long barrel, shielded, Sn=4 mm, M12 connector, PNP-NO E2A-M08KN04-WP-B1 5M Standard, M8, short barrel, non-shielded, Sn=4 mm, pre-wired PVC cable, PNP-NO, cable length=5 m 1. Basic name E2A 2. Sensing technology Blank: Standard double distance 3. Housing shape and material M: Cylindrical, metric threaded, brass S: Cylindrical, metric threaded, stainless steel 4. Housing size 08: 8 mm 12: 12 mm 18: 18 mm 30: 30 mm 5. Barrel length K: Standard length L: Long body 6. Shield S: Shielded N: Non-shielded 7. Sensing distance Numeral: Sensing distance: e.g. 02=2 mm, 16=16 mm 8. Kind of connection WP: Pre-wired, PVC M1: M12 connector (4-pole) M3: M8 connector (4-pole) M5: M8 connector (3-pole) 9. Power source and output B: DC, 3-wire, PNP open collector C: DC, 3-wire, NPN open collector D: DC, 2-wire E: DC, 3-wire, NPN voltage output F: DC, 3-wire, PNP voltage output 10.Operation mode 1: Normally open (NO) 2: Normally closed (NC) 11.Specials (e.g., cable material, oscillating frequency) 12.Cable length Blank: Connector type Numeral: Cable typeSize Type Item Sensing distance Setting distance Hysteresis Target Standard target (mild steel ST37) Response frequency (See note 1.) Power supply voltage (operating voltage range) Current consumption (DC 3-wire) Output type Control output Indicator Operation mode (with sensing object approaching) Protection circuit Ambient air temperature Temperature influence (See note 2.) Ambient humidity Voltage influence Insulation resistance Dielectric strength Vibration resistance Shock resistance Standards and listings Connection method Weight (packaged) Material Pre-wired model M12 connector model Case Sensing surface Cable Clamping nut Load current (See note 2.) Residual voltage Shielded E2A-M18S08--B1 E2A-M18S08--B2 E2A-M18S08--C1 E2A-M18S08--C2 8 mm ±10% 0 to 6.4 mm 10% max. of sensing distance Ferrous metal (The sensing distance decreases with non-ferrous metal.) 12 to 24 VDC. Ripple (p-p): 10% max. (10 to 32 VDC) 10 mA max. -B models: PNP open collector -C models: NPN open collector 200 mA max. (32 VDC max.) 2 V max. (under load current of 200 mA with cable length of 2 m) Operation indicator (Yellow LED) -B1/-C1 models: NO -B2/-C2 models: NC; For details, refer to the timing charts. Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection Operating: -40°C to 70°C, Storage: -40°C to 85°C (with no icing or condensation) ±10% max. of sensing distance at 23°C within temperature range of -25°C to 70°C ±15% max. of sensing distance at 23°C within temperature range of -40°C to 70°C Operating: 35% to 95%, Storage: 35% to 95% ±1% max. of sensing distance in rated voltage range ±15% 50 MΩ min. (at 500 VDC)



| Payment & Delivery |
● Price Advantage
We enjoy a mature industrial chain and convenient access to major transportation networks. Thus we ensure give the most competitive prices to customers and guarantee the completion time.
● Professional Service Team
Strong professional sales team in service any time. we are sure any of your inquiry will get our prompt attention & reply in 1-4 hours. If there's any question, please contact with our sales.
● Large Stock and High Efficiency
Our company have large stock which keep more than 10 thousands products in Guangzhou and Hongkong warehouses. We usually ship the items within 1-5 working days after the payment is reached.

| FAQ |
1.Q:Other suppliers have a better price than yours?
A: ''To create the greatest benefit for clients'' is our belief, if you have a better price, please let LANEN know. We will try the best to meet your price and support you.
2.Q:What's the delivery time ?
A: Normally we have enough stock for regular models(such as Servo HG-KR43B) and we can deliver immediately at the same day after receiving the payment.
For some special application products, let us check together and we will evaluate the reasonable delivery for our customers.Usually we can deliver within a week.
3.Q:What is the standard of package?
A: Export standard package or special package according to customer requirement
4.Q: Could Lanen provide technology support?
A: We're in this field for more than 15 years and we have our own technical team. If there's any problem, please contact with us, we'll provide suggestion from our engineer to help you solve the problem.
5.Q:Does Lanen keeps goods in stock or only trading?
A: We have warehouses in Guangzhou and HongKong and keep large stock of goods in the warehouse, so that we can promise fast delivery.
Hot Tags: mitsubishi hg-kr series hg-kr43b servo motor ac drives 400w 3ac 108v 400w 1.8kg 250hz, suppliers, distributor, buy, price, discount, original, in stock, Original Servo Motor HG Series 750W 4 8A, Original Mitsubishi MELSERVO J3 series Linear ac servo motor, Original Mitsubishi J4 series Linear ac servo motor, Servo Motor HG SR102B, Original HA SH502 Mitsubishi, Original Servo Motor HC MFS43
Hot Tags: e2a-s08kn04-m5-b2 sensor: inductive; out: pnp / nc; 0÷4mm; 12÷24vdc; m8; ip67; 200ma, suppliers, distributor, buy, price, discount, original, in stock
Send Inquiry

