Mitsubishi GT2103-PMBLS
Part number: GT2103-PMBLS
Availability: In stock
Contact us: inquiry@lanenelectric.com
Send Inquiry
Product Details of Mitsubishi GT2103-PMBLS
Product Introduction
Product Descriptions
Mitsubishi GT2103-PMBLS
Mitsubishi Touch Panel GT2103-PMBLS Performance specifications：
| Display section*1 *2 | Display device | TFT monochrome LCD | |
| Screen size | 3.8" | ||
| Resolution | 320 x 128 dots | ||
| Display size | 89.0 (W) x 35.6 (H) mm (3.50 (W) x 1.40 (H) mm inch) |
||
| Number of displayed characters | 16-dot standard font: 20 characters x 8 lines (two-byte characters) 12-dot standard font: 26 characters x 10 lines (two-byte characters) |
||
| Display color | Monochrome (black/white) 32 shade grayscale | ||
| Brightness adjustment | 32 levels | ||
| Registrable number of screen | 2048 | ||
| Backlight | LED (not replaceable) | ||
| Backlight life*4 | Approx. 50000 h (operating ambient temperature: 25°C, display intensity: 50%) | ||
| Backlight color | 5-color LED (white, green, pink, orange, red) | ||
| Touch panel*3 *11 | Type | Analog resistive film | |
| Key size | Minimum 2 x 2 dots*9 (per key) | ||
| Simultaneous press | Not available*5 (Only 1 point can be touched.) | ||
| Life | 1 million touches or more (operating force: 0.98 N or less) | ||
| Human sensor | Detection length | ||
| Detection temperature | |||
| User memory | Memory for storage (ROM) *17 : 3 MB Life (number of write times) : 100000 times |
||
| Battery | Type | ||
| Backup target | |||
| Life | |||
| Built-in interface | RS-232 | Number of channel | |
| Transmission speed | |||
| Connector shape | |||
| RS-422/485 | Number of channel | ||
| Transmission speed | |||
| Connector shape | |||
| RS-422/232 | Number of channel | ||
| Transmission speed | |||
| Connector shape | |||
| Application | |||
| RS-422 | Number of channel | 1 channel | |
| Transmission speed | 115200, 57600, 38400, 19200, 9600, 4800 bps | ||
| Connector shape | 9-pin connector terminal block*15 | ||
| Ethernet | Number of channel | ||
| Data transfer method | |||
| Connector shape | |||
| Bus interface | Type | ||
| Number of channel | |||
| RGB interface | |||
| Printer interface | |||
| USB (host) | Number of channel | ||
| Maximum transfer rate | |||
| Connector shape | |||
| USB (device) | Number of channel | 1 channel (rear face) | |
| Maximum transfer rate | Full-Speed 12 Mbps | ||
| Connector shape | USB Mini-B | ||
| SD memory card | |||
| CF card interface | |||
| PC card interface | |||
| Option function board interface | |||
| Memory board interface | |||
| Wireless LAN communication unit interface | |||
| Sound output interface | |||
| Buzzer sound | Single tone (tone length adjustable) | ||
| LED specifications | POWER LED | ||
| Installation method | Standard | ||
| Panel color | Black | ||
| Protective structure*7 | Front: IP67F*10 Inside control panel: IP2X |
||
| External dimensions | 113 (W) x 74 (H) x 27 (D) mm (4.45 (W) x 2.91 (H) x 1.06 (D) inch) |
||
| Panel cut dimensions | 105 (W) x 66 (H) mm (4.13 (W) x 2.60 (H) inch) |
||
| Weight (excluding a fitting) | 0.18 kg (0.40 lb) |
||
Product Applications
*1)As a characteristic of liquid crystal display panels, bright dots (always lit) and dark dots (never lit) may appear on the panel. Since liquid crystal display panels comprise a great number of display elements, the appearance of bright and dark dots cannot be reduced to zero. Individual differences in liquid crystal display panels may cause differences in color, uneven brightness and flickering. Note that these phenomena are characteristics of liquid crystal display panels and it does not mean the products are defective or damaged.
(*2)Flickering may occur due to vibration, shock, or the display colors.
(*3)When a stylus is used, the touch panel has a life of 100 thousand touches. The stylus must satisfy the following specifications (Material: polyacetal resin/Tip radius: 0.8 mm or more) .
(*4)To prevent the display section from burning in and lengthen the backlight life, enable the screen save function and turn off the backlight.
(*5)If you touch two points or more simultaneously on the touch panel, a switch in an unintended location may operate. Do not touch two points or more simultaneously on the touch panel.
(*7)Note that the structure does not guarantee protection in all users' environments. The GOT may not be used in certain environments where it is subjected to splashing oil or chemicals for a long period of time or soaked in oil mist.
(*9)The minimum size of a key that can be arranged.To ensure safe use of the product, the following settings (Key size: 16 x 16 dots or larger) are recommended.
(*10)The suffix "F" of IP67F is a symbol that indicates protection rate against oil. It is described in the Appendix of Japanese Industrial Standard JIS C 0920.
(*11)Repeatedly touching the outer edge of the actual display area may cause the product to fail.
(*15)Use a 3 m or shorter cable.
(*17)While writing data to the memory for storage (ROM) , if GOT is powered off, the data may be corrupted which may cause the GOT to stop operating.
| Ambient operating temperature | 0°C to 55°C (horizontal installation), 0°C to 50°C (vertical installation) | |
| Ambient storage temperature | -20°C to 60°C | |
| Ambient operating humidity | 10%RH to 90% RH, non-condensing | |
| Ambient storage humidity | 10%RH to 90% RH, non-condensing | |
| Vibration resistance | Approval standards | Compliant with JIS B 3502 and IEC 61131-2*13 |
| Under intermittent vibration | [ Frequency: 5 to 8.4 Hz ] Half amplitude: 1.75 mm [ Frequency: 8.4 to 150 Hz ] Acceleration: 4.9 m/s2 |
|
Under continuous vibration |
[ Frequency: 5 to 8.4 Hz ] Half amplitude: 1.75 mm [ Frequency: 8.4 to 150 Hz ] Acceleration: 4.9 m/s2 |
|
| Shock resistance | Compliant with JIS B 3502 and IEC 61131-2 (147 m/s2 (15 G), 3 times in each X, Y, or Z direction)*13 | |
| Operating atmosphere | No greasy fumes, corrosive gas, flammable gas, excessive conductive dust, and direct sunlight (as well as at storage) | |
| Operating altitude | 2000 m or less | |
| Installation location | Inside control panel | |
| Overvoltage category | II or less | |
| Pollution degree | 2 or less | |
| Cooling method | Self-cooling | |
| Grounding | Grounding with a ground resistance of 100 Ω or less by using a ground cable that has a cross-sectional area of 0.14 to 1.5 mm2 (single wire), 0.14 to 1.0 mm2 (stranded wire), or 0.25 to 0.5 mm2 (rod terminal with an insulation sleeve). If impossible, connect the ground cable to the control panel. *16 | |
| Remarks | Ambient operating temperature | Includes the temperature inside the enclosure of the control panel to which the GOT is installed. |
| Ambient operating humidity | When a protective cover for oil is mounted on the horizontally installed GOT, the maximum operating ambient temperature must be 5°C lower than the one described above. | |
| Ambient storage humidity | If the ambient temperature exceeds 40°C, the absolute humidity must not exceed 90% RH at 40°C. | |
| Operating altitude | Do not use or store the GOT under a pressure higher than the atmospheric pressure at altitude 0 m. Doing so may cause a malfunction. Air purging by applying pressure to the control panel may create clearance between the surface sheet and the touch panel. This may cause the touch panel to be not sensitive enough or the sheet to come off. |
|
| Overvoltage category | This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within the premises. Category II applies to equipment that is supplied with power from fixed facilities. The withstand surge voltage for the equipment with the rated voltage up to 300 V is 2500 V. |
|
| Pollution degree | This indicates the occurrence rate of conductive material in an environment where a device is used. Pollution degree 2 indicates an environment where only non-conductive pollution occurs normally and a temporary conductivity caused by condensation shall be expected depending on the conditions. |
|
Related Products
|
MITSUBISHI HMI |
Series |
Part Number |
|
GOT1000 |
GT1150HS-QLBD |
|
|
GT1455-QTBD |
||
|
GT1155-QSBD |
||
| GT1555-VTBD | ||
| GT1555-QTBD | ||
| GT1665M-VTBA | ||
| GT1665M-STBD | ||
|
GT1450-QMBD |
||
|
GT1675M-STBA |
||
| GOT2000 |
GT2505-VTBD |
|
|
GT2510-VTBD |
||
| GT2512-STBD | ||
| GT2715-XTBD | ||
| GT2512-STBA | ||
| GT2308-VTBA | ||
| GT2712-STBA | ||
|
GT2705-VTBD |
Company Profile
Guangzhou Lanen Electronics Technology Co., Ltd brings 20 years of industry experience to the world of industrial automation.
As a forward-thinking enterprise, we strive to empower factories with cutting-edge automation technologies, driving them toward an era of intelligent manufacturing.
Our core product range includes PLCs, Inverters, Servo Systems, HMIs, and Gear Reducers, sourced from globally recognized brands like Omron, Allen Bradley, Fanuc, Schneider, and Delta.
Trust us to deliver solutions that enhance efficiency and productivity!
222-1XF32-2XB0 Siemens Digital Output Module, 8 Outputs, 28.8 VDC
6AG1222-1XF32-2XB0 Siemens Digital Output Module, 8 Outputs, 28.8 VDC
| Payment & Delivery |
● Trade Terms: EXW Guangzhou, China
6AG1222-1XF32-2XB0 Siemens Digital Output Module, 8 Outputs, 28.8 VDC
● Payment Methods:
√ Accepted Payment Currency: USD, CNY
√ Accepted Payment Type: TT Bank transfer, Western Union, Paypal etc.
6AG1222-1XF32-2XB0 Siemens Digital Output Module, 8 Outputs, 28.8 VDC
● Shipping Ways:
√ DHL/FedEx/UPS/TNT/EMS/Aramex for fast and Door-to-Door shipment.
√ By Air or by Sea for bulk of batch goods.
√ Customer can specify freight forwarders or other shipping Methods.
6AG1222-1XF32-2XB0 Siemens Digital Output Module, 8 Outputs, 28.8 VDC
| Our Service |
● Price Advantage
We enjoy a mature industrial chain and convenient access to major transportation networks. Thus we ensure give the most competitive prices to customers and guarantee the completion time.
6AG1222-1XF32-2XB0 Siemens Digital Output Module, 8 Outputs, 28.8 VDC
● Professional Service Team
Strong professional sales team in service any time. we are sure any of your inquiry will get our prompt attention & reply in 1-4 hours. If there's any question, please contact with our sales.
6AG1222-1XF32-2XB0 Siemens Digital Output Module, 8 Outputs, 28.8 VDC
● Large Stock and High Efficiency
Our company have large stock which keep more than 10 thousands products in Guangzhou and Hongkong warehouses. We usually ship the items within 1-5 working days after the payment is reached.
6AG1222-1XF32-2XB0 Siemens Digital Output Module, 8 Outputs, 28.8 VDC
| FAQ |
Q: What's the differences between Mitsubishi GT2103-PMBLS?
They are same in sizes and functions, only HG- SR702BJK is with oil seal, which is better and will not spill oil.
Q: Will you deal with it if any product issue after I receive the goods?
Certainly. If any claim raised up during Warranty period, we will certainly take responsibility; However, we need your help to provide some photos and/or videls to investigate first, then finalize the problem.
GT21 GOT HMI - 3.8 inch Mitsubishi Electric GOT2000 HMIs inherit all the features of the GOT1000 series and introduces a more refined and advanced function set. The clear high quality display is designed to optimize operator control and monitoring of device and line statuses. TFT LCD display 3.8" screen size 5 changeable colour backlight (white, green, pink, orange & red) Different interface types Mitsubishi GOT2000 Series
Hot Tags: Mitsubishi GT2103-PMBLS, suppliers, distributor, buy, price, discount, original, in stock, 5 7 Inch GT1055 QSBD Mitsubishi HMI, Mitsubishi GT25 Series HMI, Brand New Mitsubishi Touch Screen Panel, Mitsubishi F940GOT Series HMI, Origin Japan Mitsubishi Human Machine Interface, Original Mitsubishi Display Units GT27 Series
Send Inquiry