Mitsubishi touch screen operation setting function
1. Set the buzzer volume. None, short, long
<factory setting: short>
2. Correct the reading error of the touch screen
<factory setting: adjusted>
Operation setting via GT Desinger2
Please set the buzzer volume and window movement’s buzzer volume in the "GOT Settings" of GT Desinger2 "System Environment".
After downloading the project data, if you want to modify some settings, please through the display settings of the GOT to change.
GT Designer2 Version□ Screen Design Manual
3. GOT display and operation setting (GOT setting)
1)Touch "Buzzer volume" to display the setting screen.
2)Touch the setting item to change the setting content.
(Buzzer volume: short long none)
3) After changing the setting, please touch the ESC button
Confirm the setting and close the setting screen.
Operation setting
Operation setting operation
Language setting Communication interface setting Display and operation setting Clock
Touch screen adjustment
Touch "Calibration" to display the setting screen.
Touch "+" in the upper left corner of the screen.
Touch "+" in the lower left corner of the screen.
Touch "+" in the upper right corner of the screen.
Touch "+" at the bottom right corner of the screen.
After the operation and the adjustment of the touch screen is finished, then
displays the "Operation" screen once.
The touch screen adjustment is abnormal. If the result of the touch screen adjustment operation is not operable, the following message will be displayed.
YES button...returns to the touch screen adjustment screen.
NO button...abandon the touch screen adjustment result and end the touch screen adjustment