Q1: How does the GT1030 Mitsubishi touch screen use USB for data transmission?
A1: Use USB to 232 cable + QC30R2 connection, pay attention to select the appropriate COM port in the software
Q 2: What will happen to the touch screen after a sudden power failure?
A2: Instantaneous power failure<>
Q3: The LCD screen has bright spots and flickers. Is the touch screen bad?
A2: The touch screen has bright spots (-points that light up straight) and black spots (points that don't light up) are the characteristics of the LCD screen. There is something wrong in the LCD screen
There are many display components, so there is no guarantee that bright and black spots will not appear 100%. In addition, there may be flickering depending on the display color.
Flashing appears. The appearance of bright spots, black spots or flickering is not due to a bad product or malfunction, but its characteristics.
Q4: How to perform communication monitoring in the system menu?
A4: You can enter the system menu by touching the upper left and right corners of the screen at the same time, then touch 'Communication Settings', and then touch 'Communication
Information monitoring’, in which the white part at the bottom indicates that sending or receiving is not performed.
Q5: The touch positioning of the touch screen is not accurate, how to calibrate it?
A5: Enter the touch screen system menu setting interface, select the calibration’ menu, and accurately click the <+> sign until you return to the menu setting
Just set the interface
Q6: How to start the utility menu function.
A6: 1. When there is no project data, after power-on, touch the OK key to display the utility menu. 2. When the edited screen is displayed,
The default factory setting is to touch the upper left corner to display the utility menu. 3. Set the extended function switch in the screen, select practical
Menu to display the practical menu.
Q7: How to make the window pop up automatically?
A7: Assign a value to the window switching device. The value is the number of the specified pop-up window.
Question 8: Can the GT10 series touch screen be simulated?
Answer: The new software of GT Simulator3 can be used for simulation, and the software version needs to be supported above 1.22Y.