When communicating in the Mitsubishi PLC network, you will not feel the difference and discontinuity of the network type, and can carry out the data communication between the networks and the remote monitoring, modification, and debugging of the program, regardless of the network level and type . MELSECNET/H and CC-Link use the cyclic communication method to send and receive information periodically and automatically. No special data communication program is required, and only simple parameter settings are required. MELSECNET/H and CC-Link use broadcast methods to transmit and receive cyclic communication, so that data sharing on the network can be achieved. For the Ethernet, MELSECNET/H, and CC-Link networks used by Q series PLCs, network parameters and various functions can be set on the GX Developer software screen, which is simple and convenient.
In addition, in addition to the network mentioned above, Q series PLC can also support Profibus, Modbus, Devicenet, ASi and other manufacturers' networks, and can also carry out RS-232/RS-422/RS-485 and other serial communications. , Various communication methods such as data transmission through data dedicated lines and telephone lines.